Used Industrial & Construction for sale

Distiller C-Can, Length - 40ft 3in., Width - 8ft 7in., Height - 9ft 3in., Burner C-Can, Length - 40ft 3in., Width - 8ft 7in., Height - 9ft 3in., Distillation tower height - 25ft, Marley Aquatower Model 492 Cooling Tower - SPX Cooling Technologies, ARO double diaphragm pumps - Ingersoll Rand, Feed pump, Product pump, Waste pump, Flojet pumps - Xylem, Dilutive water pump, Level controllers - Kimray, Level control valves - Kimray, Glycol circulating pumps - MP Pumps, 5 HP HTO 120, 7.5 HP HTO 180, Oil circulating pump - MP Pumps, 7.5 HP HTO 180, Vacuum pump LEM series - SIHI, 4 pass heat exchangers, Shell and tube, 2 heat exchangers in series, Length - 10ft, Diameter - 12.8125in., Condenser - American Industrial Heat Transfer, 2 pass shell and tube, Length - 7ft, Diameter - 8in. , Heat exchanger - American Industrial Heat Transfer, 2 pass shell and tube, Cool glycol finished product with cooling tower water, Length - 3ft , Diameter - 6.25in., PLC, Dir

Skid width - 8ft3in., Base to the top of distillation tower - 25ft, Base to the top of evaporator - 13ft9.5in., Marley Aquatower Model 492G Cooling Tower - SPX Cooling Technologies, ARO double diaphragm feed, product and waste pumps - Ingersoll Rand, Flojet pumps for: Tower Reflux/Dilutive Water/Seal Water - Xylem, Level controllers - Kimray, Level control valves - Kimray, Temperature controllers - Kimray, Glycol circulating pump 5 HP HTO 120 - MP Pumps, Oil circulating pump 5 HP HTO 120 - MP Pumps, Vacuum pump Model TRMB 25-30 - Travaini, 4 pass heat exchanger shell and tube - Perry - Length - 12ft GRU-2000-V2.5in. - O.D. - 10.75in. - Tubes (72) - 3/4in. O.D. x 18 GA. x 10ft LG., Condenser - Perry - Length - 10ft2in. - O.D. - 8.625in. - Tubes (55) - 3/4in. O.D. x 18 GA. x 8ft LG., Pneumatic control valves in panel with Isonic 4000 series manifold - Mead Fluid Dynamics, Temperature and Process Controller - Omega, Natural gas burner - Maxon - Series 67 Tube-O-Flame - 8

Capacity: 800 Kn Live Load (81 Tons) Size: Width: 48ft (14.755m) X Length: 60ft (18.8m) CL-800 (Non-Composite) Bridges were Fabricated by Rapid-Span and are Engineer Stamped 6 - 18.29m Long Steel Girders c/w Bolted Bracing, 18 - Precast Concrete Non-Composite Deck Panels, Thrie Beam Railings & Posts (TL-2 Barrier) c/w W-beam and All Associated Hardware Required to Assemble Steel Girders and Precast Deck. Bridge Designed to Meet CL-800 Design Loading DESIGN CODE: CAN/CSA-S6-14. In Service for 2 Years. Bridge Currently Disassembled and in Storage

ASKING PRICE IS $45,000 PER REEL AND THERE ARE (99) REELS AVAILBLE FOR PURCHASE ***

To place offers on more than (1) reel, follow the steps below:

1. Adjust "qty to purchase" to desired quantity.

2. Enter "make offer" amount (Reminder: Make Offer amount is per (1) reel and if offer is accepted by seller, selling price will reflect "make offer amount" multiplied by the "qty to purchase")

3. Submit offer by clicking "make offer"

Per Seller: Cable is unused project surplus and sold in full reel quantities only.

Qty (99) Reels Available - Approximately 380,000 feet of cable

Identified reel lengths - 4770, 4730, 4680, 4712, 4680, 4601, 4713, 4770, 4727, 4700, 4715.

No adjustment will be made for cable reel length received.

**Please see seller supplied spec sheet in the documentation section below**

Location will load at no charge.

ASKING PRICE IS $70,000 PER REEL AND THERE ARE (7) REELS AVAILBLE FOR PURCHASE ***

To place offers on more than (1) reel, follow the steps below:

1. Adjust "qty to purchase" to desired quantity.

2. Enter "make offer" amount (Reminder: Make Offer amount is per (1) reel and if offer is accepted by seller, selling price will reflect "make offer amount" multiplied by the "qty to purchase")

3. Submit offer by clicking "make offer"

Per Seller: Cable is unused project surplus and sold in full reel quantities only.

Qty (7) reels available - Approximately 70,700 feet of cable Identified reel lengths - 10100, 10130

No adjustment will be made for cable reel length received.

**Please see seller supplied spec sheet in the documentation section below**

Location will load at no charge.

ASKING PRICE IS $57,000 PER REEL AND THERE ARE (18) REELS AVAILBLE FOR PURCHASE ***

To place offers on more than (1) reel, follow the steps below:

1. Adjust "qty to purchase" to desired quantity.

2. Enter "make offer" amount (Reminder: Make Offer amount is per (1) reel and if offer is accepted by seller, selling price will reflect "make offer amount" multiplied by the "qty to purchase")

3. Submit offer by clicking "make offer"

Per Seller: Cable is unused project surplus and sold in full reel quantities only.

Qty (18) reels available - Approximately 164,000 feet of cable

Identified reel lengths - 9150, 9140, 9220, 9133, 9080

No adjustment will be made for cable reel length received.

**Please see seller supplied spec sheet in the documentation section below**

Location will load at no charge.

ASKING PRICE IS $57,000 PER REEL AND THERE ARE (15) REELS AVAILBLE FOR PURCHASE ***

To place offers on more than (1) reel, follow the steps below:

1. Adjust "qty to purchase" to desired quantity.

2. Enter "make offer" amount (Reminder: Make Offer amount is per (1) reel and if offer is accepted by seller, selling price will reflect "make offer amount" multiplied by the "qty to purchase")

3. Submit offer by clicking "make offer"

Per Seller: Cable is unused project surplus and sold in full reel quantities only.

Qty (15) reels available - Approximately 137,400 feet of cable

Identified reel lengths - 9140, 9070, 9220, 9183, 9160, 9220, 9180

No adjustment will be made for cable reel length received.

**Please see seller supplied spec sheet in the documentation section below**

Location will load at no charge.

To Fit RITCHFIELD EQUIPMENT 1.8 cube tank mud vacumm, 25 hp 3 Phase Motor, Fruitland vacuum Compressor, explosion proof, float shut off, 480 volt 3 phase

3 Phase Motor

Kitchenette, (1) Bathroom w/ Shower, (2) Bedrooms

To Fit HOT ROD 18-11, 2x HotRot reactor units with control panels. Shredding system with loading hopper, 2x 10hp drive motors, and loading auger, 5 m3 infeed hopper with incline and cross-feed augers and monitoring platform, Horizontal and incline output augers with screener chute attachment. 1/2" minus screening trommel with 1yd3 wheeled cart for catching and unloading screened materials (custom Wilmar Wrangler quick attachment - could be modified for skid steer quick attachment plate). 2x 500 cfm biofilters including exhaust fans and monitors

(5) 120' Cables, (15) Braces

HL93 Rating

Efco forms. Flat (parapet) Sections - Qty of 20. Curved sections (Barrier) - Qty 10. Top Form Extensions - Qty 10. Associated Hardware and Accessories Included. all form are 10 Ft long.

2010 US EPA Label, Honda GX620 & GX630 20 hp Gasoline Engine, Includes Three (3) Mast Climber Units (One Stationnary Unit and Two Units with Chassis Base on Wheels), Single Mast Platform Length 40 feet, Maximum Anchored Mast Height 150 feet, Maximum Capacity 6000 lbs ea., Hydraulic Operating Pressure 2900 PSI, Hydraulic rack-and-pinion drive system, Lift Speed 39 feet/minute. Includes 32 x 4ftx4ft deck parts, 100 x wall and std mast parts (some needs repair), 34 x rails parts and additional mounting and utility hardware

Qty 8 - 2" Poly Discharge Hoses
Qty 2 - 1" Conduit Roll
Qty 1 - 4" Corrugated Drain Line Coil

Qty 6 - 16" Pipe 30' Long
Qty 4 - 16" Pipe 11'-9" Long
Qty 2 - 4" Pipe 30' Long
Qty 1 - 16" Sleeve
Qty 1 - Pallet of Pipe & Fittings

Qty 700 - 3" x 6' Orange
Qty 100 - 4" x 4'-6" Yellow

Qty 3 - Pressure Gauges
Qty 1 - EMS II Marker Locator
Qty 1 - Welker Adjustable Probe AP-3MI&AIP-3MI

To Fit Hommak M-HM30 Homogenizer, 3 Phase Motor, Canner, Homogenizer, Refrigerated Tank w/ Agitator, Food Processing Grinder, Steam Boiler, Chiller, Steam Recovery Tower, Blender, Yogurt Filling Machine, Sullair Air Compressor

Bridge Length 50 Ft X 18 Ft Wide When Bolted Together Side By Side. 3 Ft Tall X 1/2 In Thick I Beam Support Frame, 4 In X 4 In Galvanized Risers Under Decking. 3 In X 8 In Brand New Treated Wood Decking Mounted With Galvanized Carriage Bolts

125 PSI, Hoses

2.1 kW 3 Phase Motor

Baldor 1 hp 3 Phase Motor, extensions

4' 8" Wide x 12' 4" Long, 7' 2" High, Lift height: 130 Feet, 480 V, 60 Hz, 3 Phase, Vertical Speed: 175 ft/min, Galvanized Mast, (5) Wall Tie-In, (4 ) Landing Gates, 170' Power Cable, (1) Cable Trolley, Manuals

Centrifugal Evac Pump:
2021
50/60 HZ
380/440 V

Motor:
50/60 HZ
240 Volts
850 RPM
36.5 AMPS
10 HP

Honda Gasoline Engine, (1) Free Standing Base, (1) Set of Stairs, (14) Sections of Hand Rails, (2) 10 ft Platform Sections, (2) 6 ft x 8 in Platforms, (8) Outriggers, (1) Safety Cage, 45 ft of Tower Sections

(15) 5 ft Mast Tower, (3) 10 ft Work Platforms, (3) 3 ft 4 in Work Platforms, (1) Forward Extension Kit, Misc. Ties

Tier 3, 2005 US EPA Label, Honda GX280 1 Cylinder Gasoline Engine

Tier 3, 2006 US EPA Label, Honda GX-240 1 Cylinder Gasoline Engine